|
|
|
|
Miscellaneous Stuff |
||
|---|---|---|
|
FC7 Foot Pedal Adapter
Our favorite volume/expression pedal
is the Yamaha FC7, which is also shipped by Korg (under their label) with the BX-3 and CX-3 organs as the
"OXP-1." The FC7 is just about the perfect volume/expression pedal: it's rugged, stays
put, lasts for years (I have one that I bought in 1991 that I still use), and has a very smooth response.
Unfortunately, the FC7 isn't directly compatible with keyboards by Roland, Kurzweil, Clavia (Nord),
Voce, M-Audio, and others without
rewiring the permanently
attached cable, which of course voids the warranty. This small, rugged adapter saves you from
having to cut the plug off the cable and re-solder the connections to a new plug!
The FC7X-II has a small right-angle plug that fits all applications, and a rugged strain relief.
Q:
A note to international customers: We have been shipping the FC7X-II worldwide at no
additional postage for some time now. Shipping costs continue to rise, though, and we can no longer
do this. We must add a small amount ($1.00USD) to your shipping costs to cover our expenses.
Your understanding is appreciated.
|
| Note: | Making the
FC7X-II at a profit, while keeping the selling cost reasonable, requires buying parts in very large quantities.
Inventory has reached a point where another buy would be necessary, and we have decided NOT to do so.
(We only sell 100 of these adapters in an average year.) When this lot runs out, the FC7X-II will
no longer be available.
WE NOW HAVE LESS THAN 25 ADAPTERS LEFT, AND MUST LIMIT THE AVAILABILITY TO TWO (2) ADAPTERS PER CUSTOMER. |
|---|---|
| Note: | These cables are hand-made. Keeping ahead of orders is no longer possible, due to other commitments. Effective immediately (9/11/2008), cable orders are only GUARANTEED to ship on Saturdays, regardless of when the order is placed online. Please keep this in mind when placing your order. In addition, the Priority Ship option is no longer available to US customers: paying for "expedited" shipping on a Monday or Tuesday makes no sense. Thank you for your understanding. |
Replacement Halfmoon Switch Knobs
'Cause everyone knows they fall off!
|
||||
| Set of 2 Spare
Knobs $5.50 3 LEFT |
||||
Replacement Keyboard/Speaker Stand Knobs (Thumbscrews)
|
|||||||
 |
These threaded knobs fit Ultimate Support and
other keyboard and speaker stands -- any piece of gear that uses a 1/4"-20 threaded knob. They're made of a durable
acetal plastic which resists scratches and damage from dropping. Don't throw that stand out -- replace the knobs
and it'll work like new again!
Note: These knobs have stainless steel threads, and my strip if overtighted in a standard steel nut. We supply a matching stainless steel nut, and we highly recommend that you replace the existing nut with the included part.
|
||||||
Replacement Slider Knobs
|
|||||||||||||||||||||||||||||||||||||
|
These are exact replacement Re'An slider
knobs used on Mackie, Soundcraft, and many other mixers, perfect for replacing the one that fell off at a gig,
or never came with your used or demo gear. It's also useful to swap out some of the one-color set on a
mixer to make it easier to make adjustments on stage; use the colors to define a vocal grouping, or the drum
channels, for example. We sell five basic colors: black with white stripe, red with white stripe,
blue with white stripe, grey with white stripe, and white with black stripe.
The knobs are available in two shaft styles: 1mm x 8mm, which fit Alps 100mm faders used on Behringer and other equipment, as well as Mackie studio consoles (the style inside the blue border in the drawing); and 1mm x 4mm, which fit Mackie CR/CFX and Soundcraft mixers with 60mm Alps faders, as well as CME Keyboards, and many other brands (the style inside the red border in the drawing). NOTE: Due to circumstances beyond our control, we have had difficulties obtaining the blue-colored knobs over the past 18 months. We have decided to discontinue this part, and availability of the blue slider knobs is limited to stock on-hand. As of this writing, we have less than 30 of these parts. Please contact us prior to ordering if you need more than a few of them. Please also note that the blue slider we have available is NOT the standard "Mackie blue," which can only be obtained from Mackie; it's the brighter blue shown in the color chart. If you plan to replace one of the blue sliders in the Sub Assign section, we recommend that you replace all four of them. We also have a very limited quantity of blue sliders with white stripe that are narrower (9mm vs. 11mm), also with the "M" mounting. Note: Not all colors are available in both styles. Click here to see how to modify an "M" slider into the "K" style.
|
||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
| Set of 5 Blue Narrow Size
$3.50 |
|||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||
|
NOTE: There are three basic slider mounts or "tangs." Most of the slider
styles we sell use the "M" mounting tang style, as seen below, which is the most popular style. The
ones marked as "8mm" use the "K" mounting tang style; note that some sliders have a split in the
tang, others do not. (As a general rule, 60mm faders have an M tang, and 100mm faders have a K tang.) If
your sliders do not have a T-top, then one of our knob styles should fit.
|
|||||||||||||||||||||||||||||||||||||
|
Why you NEED a longer power cord --
Our Long Power Cord is 15 feet long. That's right -- 4-1/2 meters and change! Chances are,
it'll reach from your end of things to whatever you need to plug into. It's UL approved, and comes
in only one color: black -- just to make Henry Ford proud.
Note: These long cords are nice and thick, so they're heavy, and shipping costs are higher than most
items in this category.
OK, so then why do you need a shorter cord?
Our Short Power Cord is only three feet long (0,9m). If we ever find a 2-foot version at a good price, it's history! It's also UL approved, and comes in Mr. Ford's favorite color, just like its big brother.
So, what's this "Xtra-Short" one for? That's an interesting story. They make a 1-foot cord, but not a 2-foot version. So, we're offering buyers a choice: 3-foot for those places where the power cord isn't exactly next to the outlet, and 1-foot for when it is. If you can live with a very short cord, you'll save even more space and weight. It's also UL approved, and comes in classic black -- why buck a trend here?
| |||||||||||||||||||||||||||||
|
Visit The CloneWheel Page, dedicated to the operation and use of tonewheel organ clone products, and the The ModSynth Page, dedicated to analog modeling synthesizers.
A note to international customers: AshbySolutions.com
gladly accepts international orders of most items. However, the shipping costs to non-US destinations are usually
higher, and the online ordering system cannot adjust for all of the various countries and shipping
options available. After an international order is received, AshbySolutions.com will send the buyer a
reply with the actual shipping costs. International customers are responsible for paying these
additional costs; failure to respond will delay the receipt of your order.
All sales final, excepting defective merchandise. Ashby Solutions, AshbySolutions.com, and the Ashby
Solutions logo are trademarks of Ashby Solutions. All other trademarks and registered trademarks are the property
of their respective owners.
|
||||||
|
|
|
